City Blog Edmonton

Heard By The Crowd

How Long Does It Take to Replace Kitchen Countertops? A Step-by-Step Timeline

New countertops can change the whole feel of a kitchen. The old laminate with the burn mark by the stove, the tile with grout lines you gave up scrubbing years ago, the corner that never quite sat level: all of it disappears, and a clean, solid surface takes its place. It is one of the most satisfying upgrades you can make to a home.

Before you commit, though, there is one question almost everyone asks: how long will my kitchen be out of commission? The honest answer is that the hands-on work is surprisingly short, while the full process from first visit to final wipe-down takes longer than most people expect. Knowing where the time goes makes it much easier to plan around family dinners, holidays, a rental turnover or a listing date.

This guide walks through each stage of a typical countertop replacement in order, explains what happens at each step, and points out the spots where schedules tend to stretch. Whether you live in a newer build in the southwest or a character home in an older Edmonton neighbourhood, the sequence is largely the same.

The Short Answer: A Few Days of Work Spread Over Several Weeks

If you add up the time someone is physically working in your kitchen, a countertop replacement is a small job. Measuring takes an appointment, removing the old tops usually takes part of a day, and installing the new ones is commonly finished in a single day. Plumbing reconnection and sealing follow closely behind.

The longer stretch sits in between those visits. Stone countertops are cut to fit your exact cabinets, which means the fabricator needs precise measurements before any cutting starts, and the slab has to be selected, scheduled into the shop and shaped. That waiting period is where most of the calendar time goes, and it varies from one shop and one season to the next.

So the useful way to think about it is in two numbers: how long you will be without a working kitchen (often only a few days) and how long the whole project takes from decision to finish (usually a few weeks). Ask any fabricator you are considering for both figures, because they answer very different planning questions.

Step 1: Choosing Your Material and Your Slab

Everything starts with picking the surface. Most homeowners narrow it down to quartz, granite or marble, and each one behaves a little differently once it is in your kitchen. Quartz is engineered, consistent in pattern and low on maintenance. Granite is natural stone with its own unique movement and strong heat resistance. Marble brings soft veining and a classic look, and it asks for a bit more care.

This step can be quick or it can take a while, and that is entirely up to you. Some people walk into a showroom, see a slab and know immediately. Others want to bring home samples, hold them up against cabinet doors and flooring, and look at them in morning and evening light. Both approaches are fine. Just remember that the clock on the rest of the project does not really start until this decision is made.

If you are leaning toward a uniform look that suits a busy household, browsing quartz kitchen countertops in Edmonton in person is a good way to compare colours side by side under real lighting. With natural stone, it helps to see the actual slab your countertop will be cut from, since the pattern on one slab can look quite different from the next.

Step 2: Getting the Cabinets Ready Before Anyone Measures

Countertops are measured to the cabinets underneath them, so the cabinets need to be in their final position before templating. If you are only swapping the tops and keeping your existing cabinets, this step is mostly about confirming that the boxes are solid, level and firmly attached to the wall.

If your project includes new cabinets, they have to be fully installed first. That includes any island, any panel ends and any changes to the layout. A fabricator cannot measure a cabinet that is still in its box in the garage, and any shift after templating can throw the fit off by enough to matter on a solid stone surface.

This is also the moment to finalize a few choices that affect the cut. You will want to know your sink model, your faucet style and where the faucet holes go, your cooktop or range model, and whether you want an overhang for bar stools. Having those details ready keeps the templating appointment from turning into two appointments.

Step 3: The Templating Appointment

Templating is when the fabricator comes to your home and records the exact shape of the countertop. Depending on the shop, this might be done with thin strips of material laid out on the cabinets, or with digital measuring equipment. Either way, the goal is to capture every wall that is slightly out of square and every corner that is not quite ninety degrees, because older homes in particular are rarely perfectly straight.

The visit itself does not take long for a standard kitchen. Larger kitchens, islands with unusual shapes and layouts with several seams can take more time. Plan to be home for it, since the templater will likely have questions about seam placement, edge profile, overhangs and exactly where the sink should sit.

One helpful tip: if you have a specific sink, make sure it is on site for the visit. Undermount sinks in particular need to be accounted for precisely, and having the real sink there removes any guesswork.

Step 4: Fabrication in the Shop

Once the template is complete, the project moves to the fabrication shop. Here the slab is cut to shape, the sink and cooktop openings are made, the edges are profiled and polished, and any seams are planned so they fall in the least noticeable places.

This is the stage where timelines vary most from one company to another. A shop that does its own cutting in-house controls its own schedule, while a business that sends work out to a third-party fabricator has to fit into someone else’s queue. Busy seasons also play a role, since many homeowners aim to finish renovations before hosting family over the holidays or before listing a home in spring.

Your part during fabrication is mostly waiting, which is a good time to prepare the kitchen for the next step. Clear out the upper and lower cabinets near the countertops, find a temporary home for small appliances, and think about where you will make coffee and simple meals for a few days.

Step 5: Tearing Out the Old Countertops

Removal is usually scheduled right before installation, often on the same day or the day before. Doing it this way keeps the time you go without a working sink as short as possible. The installer will disconnect the sink and faucet, sometimes the cooktop, and then lift or cut out the old surface.

How long removal takes depends a lot on what you are replacing. Laminate tends to come off quickly. Tiled countertops can be more involved because of the mortar and backer board underneath. Old stone has to be handled carefully because of its weight. If there is an existing tile backsplash that sits on top of the counter, part of it may need to come off as well.

Once the old tops are gone, you may discover small surprises: a cabinet that has sagged, a bit of water damage under the old sink, or uneven framing. Most of these are minor and can be shimmed or reinforced on the spot, but it is worth knowing they can come up, especially in older homes.

Step 6: Installation Day

This is the exciting part. The finished pieces arrive, are carried in and set onto the cabinets. The installers check that everything is level, fit the pieces together, join any seams and secure the countertop in place. Undermount sinks are attached during this step as well.

For most standard kitchens, installation is finished in a single day. Larger kitchens, big islands that need extra hands to move, or layouts with several seams can take a bit longer, but the goal is always to get you back to a usable kitchen as quickly as possible.

Natural stone such as granite and marble is often sealed before the installers leave, which helps it resist stains. It is a good idea to ask the crew how long to wait before setting heavy items on the counter or using the sink, since adhesives and sealants may need some time to cure.

Step 7: Plumbing, Backsplash and the Finishing Touches

After the countertop is in, the sink and faucet need to be reconnected. Some countertop companies handle this, while others leave it to a plumber you hire. Clarify this ahead of time, because waiting several days for a plumber can leave you with beautiful new counters and no running water in the kitchen.

If you are adding or replacing a backsplash, that usually comes next. Tile setters generally want the countertop installed first so the backsplash sits neatly on top of it. Tile work involves its own setting and grouting time, so it can add a few days to the overall finish, even though you can usually use the kitchen while it happens.

The final step is the small stuff: caulking along the wall, reinstalling the cooktop or range, and putting appliances back where they belong. Once that is done, your kitchen is officially back in service.

What Can Stretch the Timeline

Most delays come from a handful of predictable sources. Indecision on material is the most common, followed closely by cabinets that are not ready when the templater arrives. If you are running a larger renovation, the countertop schedule depends on everything that comes before it, so a delay with flooring or cabinet delivery pushes the counters back too.

Material availability also matters. A popular quartz colour or a specific granite slab may need to be ordered in, and a showroom that keeps a wide range of slabs on hand can often move faster than one that has to source every piece. Custom details like waterfall edges, mitred edges, or an unusually large island can also add shop time.

Location plays a part as well. Homeowners outside the city sometimes find that fewer local options mean longer waits, so working with a company that has a presence in your area can help. In the north, for example, homeowners can work with Majestic Stone in Fort McMurray, which operates from a Franklin Avenue location, instead of arranging for a crew to travel in from elsewhere.

How Your Material Choice Affects the Schedule

Quartz is manufactured, so colours are consistent from slab to slab. That makes the selection step easier for many people, since what you see on a sample closely matches what ends up in your kitchen. It also needs no sealing, which removes one small step from the finish.

Granite and marble are natural stone, so no two slabs look exactly alike. Many homeowners like to view and choose the actual slab, which can add a visit to the showroom. These stones are also sealed after installation, and marble may need a little more attention over the years to keep its surface looking fresh.

None of these differences is large enough on its own to make or break a schedule. Choose the material that suits how you cook and live, then build the timeline around it. A surface you love will be in your kitchen far longer than the few extra days any one choice might add.

Living Without a Kitchen for a Few Days

The stretch between removal and reconnection is the part most households feel. A little planning makes it easy. Set up a temporary station in the dining room or basement with a kettle, a coffee maker, a toaster oven or microwave, and a small bin of dishes, cutlery and basics.

Paper plates and simple meals help, and so does planning a night or two out. In Edmonton, where many of these projects happen in colder months, a slow cooker or an electric grill can stretch your options without needing the kitchen sink. A laundry room or bathroom sink can handle light washing up for a couple of days.

If you have young kids or pets, keep them away from the kitchen during removal and installation. Stone pieces are heavy, the crew needs clear paths through the house, and it is much easier for everyone when the route from the front door to the kitchen is open and tidy.

Questions Worth Asking Before You Book

A few good questions up front will tell you a lot about how smoothly the project will run. Ask how long it typically takes from templating to installation at this time of year, whether the cutting is done in-house, and whether the quote includes removal and disposal of your old countertops.

It is also worth asking who handles the plumbing reconnection, whether sealing is included for natural stone, and what happens if a cabinet needs adjusting once the old tops come off. When you are comparing quotes from an Edmonton countertop company or two, these answers make it easier to compare like with like instead of just the bottom-line price.

Finally, ask what you need to do before each visit. Clear instructions about emptying cabinets, having the sink on site and making room for the crew help keep every appointment on schedule, and they save you from last-minute scrambling.

Putting the Whole Timeline Together

Here is the sequence at a glance. First, you choose your material and slab. Next, your cabinets are installed or confirmed solid, and you settle on sink, faucet and appliance details. The fabricator then visits to template the countertops, and the pieces are cut and finished in the shop. Removal of the old tops happens just before installation, installation is usually done in a day, and plumbing, sealing and any backsplash follow shortly after.

The days you are actually without a kitchen are few. Most of the calendar time sits in selection and fabrication, which you can shorten by making decisions early, having cabinets ready and asking clear questions before you sign.

Plan for the whole process, protect the few days you will be cooking elsewhere, and you will be enjoying your new countertops before you know it. For most households, that short disruption is well worth a kitchen that looks better and works harder every single day.

Leave a Reply

Your email address will not be published. Required fields are marked *

City Blog Edmonton
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.